Athletica Sport Systems Moose 1.1 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Athletica Sport Systems Moose 1.1. Athletica Sport Systems Moose 1.1 6 pagina's. Ice puck freezer

Pagina afdrukken
Ice Puck Freezer
Product User Manual

Operation

Power: DC 12V and DC 24V
Included: INPUT: 110VAC, OUTPUT: 12VDC adapter
Battery Protection: Selecting either LOW, MED or
HIGH positions (Switch next to the DC power socket),
you can adjust the battery protection for the unit.
Refer to the table below for the voltages and settings.
Setting
12V Stop
12V Start
Low
10.2V
Medium
10.7V
High
11.7V
Battery Protection Pre-Configured Settings
Cable Length Specifications
The DC cables must have a suitable cross-section for
their length (measured from the battery to the unit).
Please refer to the table below.
Cable Thickness
12V Max Length
(mm2)
(mm2)
AWG
(m)
2.5
14
2.5
4
12
4
6
10
6
10
8
10
Temperature Setting Range: -20
Plug in the DC power cable. Press the ON/OFF button
to turn the unit on.
The LED display on the control panel will illuminate
and display the current interior temperature.
Press the UP button to increase the set temperature,
or press the DOWN button to decrease the temperature.
Pressing the SET button will toggle the temperature
display between º C and º F.
Press the SET button to begin Economy run mode.
The ECO indicator light (green) will turn on. Press the
button again; the unit will start Maximum Running
24V Stop
24V Start
11.2V
21.6V
23.0V
11.7V
22.6V
24.0V
12.7V
24.6V
26.0V
24V Max Length
(ft.)
(m)
8
5
13
8
20
12
33
20
º
C to 10
Mode (HH) and the MAX indicator (red)
will illuminate.
Economy mode runs the compressor at a lower
speed to save power. Maximum mode runs the
compressor at a higher speed, increasing power.
Economy mode is useful if the ambient temperature
is over 30 º C, or if fast cooling is required.
If the power supply is cut off or disconnected, the
unit will switch off automatically. Once the power
supply is restored, it will automatically turn on again.
Temperature
Controls
ECO / MAX
Mode Indicator Controls
(ft.)

Cleaning and Maintenance

16
Clean the unit inside and out with a clean, damp soft
26
cloth each week.
39
If it is dirty, use baking soda or table salt dissolved in
66
tepid water.
Never use abrasive products, harsh detergents or
º
C
soaps.
After cleaning, wipe down with a clean cloth and dry
carefully.
Do not store perishable food products inside the unit
if the unit is not powered on.
Ensure the interior of the unit is totally dry before
closing the lid and storing it.
Never clean the unit under running water, and never
submerge in water.
Do not clean in the dishwasher.
Do not use sharp objects or abrasive materials
during cleaning as this will damage the unit.
554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL 519-747-1856
720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL 763-249-7465
LED Display
SET Switch
Power
ON / OFF
Indicator
Switch