Carma Systems A10A00 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Carma Systems A10A00. Carma Systems A10A00 3 pagina's.

Installation Guide

WARNING: DO NOT TURN THE ENGINE ON IF THE

VEHICLE IS INSIDE A GARAGE OR ENCLOSED

SPACE, ENGINE EMISSIONS MAY CAUSE SERIOUS

INJURY OR DEATH. ONLY TURN THE ENGINE ON

WHEN THE VEHICLE IS OUTSIDE.

Step 1:

Note the make/model/year of the vehicle as well as the

transponder's serial number. You will need this information in

Step 4.

Step 2:

While the vehicle is off, locate the vehicle's diagnostic port (See

Fig 1). It's usually in the driver's side footwell. Plug the supplied

cable into the port, then plug the other end of the cable into

the transponder (See Fig. 2).

Fig. 1

Fig. 2

Step 3:

Clean the top of the dashboard near the driver's side A-pillar

using automotive glass cleaner or similar. Use the provided ad-

hesive strip to mount the transponder on the dashboard, with

the cable facing the A-pillar. Route the cable along the A-pillar,

down to the driver's footwell using the provided cable ties to

bundle the slack cable so it is out of the way (See Fig. 3).

Fig. 3

Step 4:

fleetsystemsusa.e1og.com

credentials that were emailed to you. Ensure that the vehicle

appears on the Fleetmap page (allow up to 15 minutes after

plugging in). Using the notes you took in Step 1, fill out the

year/make/model and other information on the Settings page

for the appropriate transponder serial number. Repeat Steps

1-4 for all other vehicles.

v2.1

using your account