DreamCatcher FEBPS107-2 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DreamCatcher FEBPS107-2. DreamCatcher FEBPS107-2 8 pagina's. Fitted washable electric blanket

Pagina afdrukken

Operation & Controls

1. Switch controller to ON position.

2. Set temperature "Body" or "Foot" from 1–4 heat setting. Each

can be used separately.

3. Set "Time" button to choose the heating time you need for your

body and feet ranging in 1 – 9 hours.

NOTE: This will help to dry out any moisture which has been

accumulated in the mattress. You may notice some odour when

using the blanket for the first time due to the insulation material.

This is harmless and will disappear soon. The highest mode (4 heat

setting) must be used only for preheat and not for continuous

operation. The 4

heating level will automatically transfer to the 3

level after 3 hours working. The other modes can be used

continuously. It is recommended to preset heat setting at number 2

if blanket is to be left on all night.

Remarks: If all the LED lights flashes simultaneously, please check if the

connector is properly connected, then re-operate the controller. If the LED

lights flash again, the unit is damaged.

Care and maintenance

Before cleaning

Disconnect the blanket from the mains supply, and then disconnect

the controller from the blanket. Store the controller away carefully.

Cleaning

Do not dry clean this blanket

The blanket has waterproof heating elements making it safe to

immerse in water and wash by hand or machine. Always remove

the controller first – do not allow any part of the controller to be

immersed in any liquid.

Machine Wash

With the controllers detached the blanket can be washed in a

machine (size permitting).

Wash on WOOL or DELICATES cycle with a neutral detergent or

mild soap powder at a wash temperature of 40

C. Do not use high

speed or extra spin cycles.