Carman AUTO-i 100 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Carman AUTO-i 100. Carman AUTO-i 100 4 pagina's.

Installation of Mini Bluetooth Setting(User Manual Page80~83)

* You are able to install all program of AUTO-i 100 in regular sequence with running the provided USB Flash Memory.

If you want to setthe Bluetooth only, please follow installation procedure below.

1. Click "Devices" on [SETTINGS]

3. Input Passcode (0000) -> Next

5. Run "AUTO-i Diag" Program and Click "CONFIG".

7. Check a location of diagnostic connector on a car.

- If your car uses OBD-II, most diagnostic connector is

located between a handle and a brake pedal.

- If your car is old one, not supporting OBD-II, it requires a

additional connector. Check a proper connector among what

we supplies. Location of the connector may be different

according to car models.

2.Select "Bluetooth"

-> Select "AUTO-i Device Serial Number" ->"Pair"

4. Completed Pairing

6. Select Device (AUTO-i100), Connection Method

(MINIBLUETOOTH), and Input Serial No. -> Save.

8. Connect the AUTO-i 100 to a diagnostic connector on your

car directly. If your car supplies power to AUTO-i 100, PWR

light on the front side of the AUTO-i 100 will be turned on.

If so, you do not need to connect power cable.

-3-