Carmanah F Series Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Carmanah F Series. Carmanah F Series 20 pagina's. Rrfb mast arm kit
Ook voor Carmanah F Series: Snelstarthandleiding (20 pagina's), Installatiehandleiding (16 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's), Installatiehandleiding (20 pagina's), Gebruikershandleiding (18 pagina's), Vervangingshandleiding (9 pagina's), Installatiehandleiding (18 pagina's)

Pagina afdrukken
Carmanah F Series Installatiehandleiding
3"
Discard
leftover
wire
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Prepare AI Harness
• Obtain AI harness.
• Cut and remove terminals of the five wires shown
2
(violet, blue, black, red and yellow).
• Leave green wire ring terminal intact (not shown).
• Cut yellow wire to same length as black wire.
• Cut a three-inch section of yellow wire and strip each
end 0.35", for use later.
3
• Install provided heat-shrink tubing around the five wires
4.25" from end of black wire (other wires will end up
4
being longer).
• Use heat gun to affix the heat shrink tubing.
5
• Strip insulation of the five wires 0.35".
APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE
F Series
4.25"
Page 7