Carmanah R820-G Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Carmanah R820-G. Carmanah R820-G 14 pagina's. Cabinet-based systems
Ook voor Carmanah R820-G: Snelstarthandleiding (16 pagina's), Handmatig (11 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's), Handboek voor het vervangen van kastdeuren (10 pagina's), Handmatig (9 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's)

8. Ensure that the "Current Status" indicates "Online".

9. Ensure "Current Device Status" is "OK".

10. If the door switch sensor is installed, ensure that the "Cabinet Door" status reflects the current position of

the door. Open and close the door to change the switch state and confirm Glance reflects the change.

a. Door open = Open

b. Door closed = Closed

11. Contact Applied Information to arrange the firmware in the AI unit to be programmed correctly, if this

hasn't already been done.

c. Phone: 678.830.2170

d. Email:

e. Web:

appinfoinc.com

If testing indoors where there is no GPS signal, this may result in a device status of "No GPS

Lock".

R829 school zone application shown above.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com