Forms+Surfaces Aptos Pedestrian Installatie-/bedradingsinstructies - Pagina 5
Blader online of download pdf Installatie-/bedradingsinstructies voor {categorie_naam} Forms+Surfaces Aptos Pedestrian. Forms+Surfaces Aptos Pedestrian 5 pagina's. Surface mount
Pagina afdrukkenAPTOS
PEDESTRIAN
™
STEP BY STEP
FOR ALL APTOS PEDESTRIAN LIGHTING
13
Connect power to luminaire[s]
• Locate the wire and connectors coming
from inside the pole and the luminaire.
• Snap connector together so that the wire
colors are aligned correctly.
• Confirm that connectors are securely
connected and placed out of the way for
the lower cover to be attached.
T 800.451.0410 | www.forms-surfaces.com
© 2020 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
14
Attach luminaire lower cover[s]
• Raise lower cover[s] into position.
• Place #10 Delrin Washers (g) over 10 -
24 x 1" bolts (h) and apply LOCTITE
243™ thread locker or similar on fastener
threads. Insert into luminaire and tighten
using 1/8" hex bit to secure lower cover.
SURFACE MOUNT INSTALLATION & WIRING INSTRUCTIONS
h
g
®
page 5 of 5 | 12-08-20