Forms+Surfaces HELIO BOLLARD Installatie-/bedradingsinstructies - Pagina 2
Blader online of download pdf Installatie-/bedradingsinstructies voor {categorie_naam} Forms+Surfaces HELIO BOLLARD. Forms+Surfaces HELIO BOLLARD 4 pagina's.
Pagina afdrukkenHELIO
BOLLARD
™
STEP BY STEP
FOR ALL SURFACE MOUNT HELIO BOLLARDS
Slide base onto J-bolt anchors
• Slide base base plate over J-bolt
anchors and lower base to concrete
level.
T 800.451.0410 | www.forms-surfaces.com
© 2021 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
SURFACE MOUNT WITH J-BOLTS INSTALLATION & WIRING INSTRUCTIONS
c
b
Attach base
• Slide 1/2" washer (b), then thread 1/2"-
13 nut (c) onto each J-bolt anchor.
Tighten nuts
• Use 3/4" socket and socket wrench to
tighten all nuts until snug.
page 2 of 4 | Rev. 05-25-21