Carmanah R247-E Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Carmanah R247-E. Carmanah R247-E 20 pagina's. 24 hour flashing beacon
Ook voor Carmanah R247-E: Snelstarthandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's)

• Obtain 3" of red and 3" of black wire supplied with the kit.

• Strip ends of both wires 0.35".

• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.

• Install one end of the red wire into the left BAT+ terminal.

• Install one end of the black wire into the right BAT− terminal.

• Insert the other end of each wire into two of the 5-position splice terminals.

• Route the two red battery harness wires into the

splice terminal with the red wire from BAT+.

• Route the two black battery harness wires into the

splice terminal with the black wire from BAT−.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install Battery Jumper Wires and Splice Terminals

Make sure all wire strands go into the terminal hole.

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

Red

wires

E/F Series

Black

wires

Page 10