Formsprag Long Life Holdbacks Series Instructies voor service en installatie - Pagina 6

Blader online of download pdf Instructies voor service en installatie voor {categorie_naam} Formsprag Long Life Holdbacks Series. Formsprag Long Life Holdbacks Series 8 pagina's.

Pagina afdrukken

(1)

Gasket

(2)

Adapter

(3)

Elbow

(4)

Nipple

(5)

Tee

(6)

Nipple

(7)

Clamp

(8)

Tubing

(9)

Drain Plug

(10)

Breather

Figure 5

Oil Sight Gauge Assembly

CL-7362-5

Replacement Filter Elements

Keep adequate supply of filter elements on hand. They

can be purchased from Great Lakes Filter Media Co.,

5151 Lorraine, Detroit, Michigan 48208

To Clean Breather Filter Element

1. Loosen wing nut, lift off whole breather.

2. Remove cover and filter. Rinse filter in solvent.

3. Reinstall breather housing. Add clean oil to the

mark on housing.

4. Reinstall cover and filter. Tighten wing nut.

Breathers

Clutch Model

Mfr. No.

LLH-700

569022-01

Dry Filter

LLH-750 to

LLH-1027

FAOB-07

Oil Bath Filter

6 Formsprag Clutch • 800-927-3262

Breather No.

Formsprag No.

CL-30703

CL-30703-5

Clutch Rebuilding Service

Disassembly and Repair of Formsprag Clutches in

the field is not Recommended.

Formsprag clutches are precision devises manufactured

under careful controls to meet exacting standards.

When reconditioning is required, clutches should be

returned to Formsprag directly, through the Distributor,

or through the Original Equipment Manufacturer.

Formsprag clutch and holdback are mechanical devices

designed to protect mechanical equipment from rotation

in the opposite direction and should generally not be

considered Safety Devices. Formsprag clutches and

holdbacks have surfaces which wear with use over time

and as a result will need to be replaced. The clutches

and holdbacks do not offer a feature for determining the

time of their replacement. As a result the decision for the

time of replacement must be made by the operator of

the equipment based upon the specific application and

performance of the clutch or holdback.

Packaging

Your Formsprag clutch, carefully wrapped in Vapor

Inhibitor type activated paper for corrosive protection

and packed in a shipping box conforming to the

requirements of Rule 41, Uniform Freight Classification,

may be stored for up to two (2) years and reshipped

without added packaging.

These instructions cannot cover all details or variations

in equipment and applications nor provide for every

possible contingency which may be met in installation,

operation or maintenance. Should further information be

needed, contact Formsprag Clutch.

For additional technical and dimensional information on

LLH Series clutches refer to Formsprag Overrunning

Clutch Catalog P-956 or call Formsprag Application

Assistance at 1-800-927-3262.

Rotating Equipment

Rotating equipment is potentially dangerous and should

be properly guarded. The user should check for all

applicable safety codes (in local area) and provide a

suitable guard.

P-222-14-FC • 5/19