CommScope 760082529 Montage-instructies - Pagina 4
Blader online of download pdf Montage-instructies voor {categorie_naam} CommScope 760082529. CommScope 760082529 5 pagina's. 4-post equipment rack
Pagina afdrukken
860421239
Instruction Sheet
Step 2 - Final Assembly of Rack
1.
Position both vertical racks, assembled in Step 1, on their sides on the floor approximately 23 inches
(584mm) apart. Extruded base angles should face away from each other.
2.
Position the base pan near the extruded base angles and the upper support plate near the extruded top
angles on the vertical rack rails.
3.
Attach upper support plate and base pan to assembled vertical rack rails, as shown in figure on next page.
Insert twelve 3/8 x 1" hex head bolts, 3/8 lock washers, and 3/8 hex nuts. Hand tighten only.
Page 4 of 5