Carmanah G Series Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Carmanah G Series. Carmanah G Series 14 pagina's. Rrfb mast arm kit
Ook voor Carmanah G Series: Snelstarthandleiding (16 pagina's), Handmatig (11 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's), Handboek voor het vervangen van kastdeuren (10 pagina's), Handmatig (9 pagina's), Gebruikershandleiding (18 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's), Installatiehandleiding (18 pagina's)

11. Insert terminal from door switch harness into Position 2 of AI harness connector. Orient terminal same

way as other terminals present in connector. Tug to confirm it's fully inserted. Cable ties will be tightened

and trimmed at the end of

Connector terminal shown uncrimped. Crimp wings will be bent over wire strands.

4.3

AI 500-070 Field Control Unit (FCU)

1. Install two cable tie mounts. Press into ¼" holes.

2. Install the AI harness wires to the terminals as follows:

a. Yellow → PV+ (over existing terminal)

b. Violet → INPT+

c. Blue → OUT1

d. Red → DC+

e. Black → DC-

3. Secure yellow wire to mounts & location shown with three cable ties. Leave loose/untrimmed for now.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

Section

4.3.

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com