Dreaming Robots Camera Axe 5 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dreaming Robots Camera Axe 5. Dreaming Robots Camera Axe 5 20 pagina's.

Pagina afdrukken
The following settings are only useful for advanced users with 2 valve sensors. The second valve
sensor should be plugged into the Sensor2 port.
Parameter
V2 Start Offset
V2 Drop1 Size
V2 Drop2 Delay
V2 Drop2 Size
To use this menu, plug the valve sensor into Sensor 1 and make sure it is turned on. Plug an external
flash into Camera/Flash 1 and plug the camera into Camera/Flash 2. See the section below on the
valve sensor for more information on using this menu.
Intervalometer Menu
This is a menu for taking time-lapse shots.
Parameter
Start Delay
Options
Numeric value
between 000 and
999
Numeric value
between 000 and
999
Numeric value
between 000 and
999
Numeric value
between 000 and
999
Options
hours:minutes:seconds
Description
The number of milliseconds from when the first
valve start to when the second valve starts. If
you want the drops at the same time set this to
0.
The number of milliseconds that the valve will be
open to release a drop.
The number of milliseconds after the first drop to
start the second drop.
The number of milliseconds that the valve will be
open to release the second drop.
Description
The start delay determines the time between
the activation and the first shot.