ATI Technologies QC-210 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} ATI Technologies QC-210. ATI Technologies QC-210 17 pagina's. Tool changer

Manual, Robotic Tool Changer Third Generation Teaching Aids

Document #9610-20-3370-02

1. Safety

The safety section describes general safety guidelines to be followed with this product, explanations of the

notifications found in this manual, and safety precautions that apply to the product. More specific notifications are

imbedded within the sections of the manual where they apply.

1.1 Explanation of Notifications

The following notifications are specific to the product(s) covered by this manual. It is expected that the user

heed all notifications from the robot manufacturer and/or the manufacturers of other components used in the

installation.

DANGER: Notification of information or instructions that if not followed will result in

death or serious injury. The notification provides information about the nature of the

hazardous situation, the consequences of not avoiding the hazard, and the method for

avoiding the situation.

WARNING: Notification of information or instructions that if not followed could result

in death or serious injury. The notification provides information about the nature of the

hazardous situation, the consequences of not avoiding the hazard, and the method for

avoiding the situation.

CAUTION: Notification of information or instructions that if not followed could result

in moderate injury or will cause damage to equipment. The notification provides

information about the nature of the hazardous situation, the consequences of not

avoiding the hazard, and the method for avoiding the situation.

NOTICE: Notification of specific information or instructions about maintaining, operating,

installing, or setting up the product that if not followed could result in damage to equipment. The

notification can emphasize, but is not limited to: specific grease types, best operating practices,

and maintenance tips.

The customer is responsible for ensuring that the area between the Master and Tool sides is clear of foreign

objects during mating and subsequent coupling. Failure to do so may result in serious injury to personnel.

The customer is responsible for understanding the function of the Tool Changer and implementing the

proper hardware and/or software to operate the Tool Changer safely.

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: 919.772.0115 • Fax: 919.772.8259 •

www.ati-ia.com

• Email: