Advanced Kiosks Outdoor Monolith Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Advanced Kiosks Outdoor Monolith. Advanced Kiosks Outdoor Monolith 20 pagina's.
Pagina afdrukkenPower Requirements
The following matrix is the power requirements for the kiosk's components.
manufactures may change these setting please review the manual that comes with each of the
following components for the most recent power information.
Kiosk Side 1
(Monitor + PC)
Kiosk Side 2
(Monitor + PC)
Mounting the Kiosk
When mounting to the floor you should use no less than six, 3/4" diameter sleeve anchor bolts to
secure the kiosk to your selected location's surface. Advanced Kiosks recommends at least this
specification, but please follow your local building codes, and have a professional help with
mounting. We recommend the following setup procedure:
1. Unwrap the base, and line it up on the area you intend to drill into. Use the 6 ¾" holes in
the bottom as a guide. (The bolts with nuts on them are for mounting the enclosure to the
base)
Six Floor
Mounting Holes
(3/4")
2. Using ANSI standard drill bits, carefully drill ¾" holes in the floor material using the
base of the kiosk as a guide for hole location. Hole size = Bit size when installing sleeve
Voltage
100-240 Vac
50 / 60 Hz
100-240Vac
50 / 60Hz
Kiosk Base with Mounting Holes
Outdoor Monolith Kiosk Assembly and Operation Instructions
www.advancedkiosks.com
Power Consumption
Monitor 1 + Computer
600W - 644W
Monitor 2 + Computer
600W - 644W
9
Over time
Nuts and Bolts to
Mount the
Enclosure to the
Base
12/16/2020