Bosch PSR Select WEU Originele handleiding - Pagina 14

Blader online of download pdf Originele handleiding voor {categorie_naam} Bosch PSR Select WEU. Bosch PSR Select WEU 21 pagina's.

OBJ_BUCH-1564-001.book Page 30 Thursday, December 15, 2011 8:36 AM

30 | English

The Lithium-Ion battery can be charged at any time without reducing its

service life. Interrupting the charging procedure does not damage the bat-

tery.

The Lithium-Ion battery is protected against deep discharging by the

"Electronic Cell Protection (ECP)". When the battery is empty, the ma-

chine is switched off by means of a protective circuit: The inserted tool no

longer rotates.

Do not continue to press the On/Off switch after

WARNING

the machine has been automatically switched

off. The battery can be damaged.

The battery is equipped with a NTC temperature control which allows

charging only within a temperature range of between 0 °C and 45 °C. A

long battery service life is achieved in this manner.

When the battery charge-control indicator 5 lights up red while the

On/Off switch 10 is depressed half way, then the battery has less than

30% of its capacity and should be charged.

The charging procedure begins as soon as the mains plug of the battery

charger is plugged into a socket outlet and the charge connector 14 is

plugged into the socket 9 on the bottom of the handle.

Due to the intelligent charging method, the charging condition of the bat-

tery is automatically detected and the battery is charged with the opti-

mum charging current, depending on battery temperature and voltage.

The battery charge-control indicator 5 indicates the charging progress.

The indicator flashes green during the charging procedure. When the

battery charge-control indicator 5 no longer lights up, the battery is com-

pletely charged. When the battery charge-control indicator 5 lights up

red, the battery temperature is too high.

During the charging procedure, the handle of the machine warms up. This

is normal.

Disconnect the battery charger from the mains supply when not using it

for longer periods.

The power tool cannot be used during the charge procedure; it is not de-

fective when inoperative during the charging procedure.

Observe the notes for disposal.

2 609 005 858 | (15.12.11)

Bosch Power Tools