Andersen Verilock 0113696 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Andersen Verilock 0113696. Andersen Verilock 0113696 16 pagina's. For a-series and 400 series windows and patio doors, 200 series patio doors and renewal by andersen windows
Pagina afdrukkenBattery Replacement Instructions - continued
A-Series, 400 Series & 200 Series
Hinged Patio Doors
1. Unlock and open the door panel. Secure the door
panel in the open position.
2. Loosen set screw on exterior handle using 1/8"
hex key. Remove handles and set aside.
3. Remove interior escutcheon plate from the active
door panel.
4. Remove VeriLock sensor assembly.
5. Remove discharged batteries from the VeriLock
sensor assembly using a small flat blade
screwdriver to carefully pry the batteries from the
terminals. (see battery disposal information on
page 5).
6. Replace the batteries with (2) two fresh CR-2032
lithium coin batteries, with the positive (+) side
facing out as shown.
7. Position assembly on door panel.
8. Reinstall interior escutcheon plate and handles on
door panel.
9. Verify that the sensor is communicating with your
security system or self-monitoring application
by closing the patio door and checking for the
closed message and then locking the patio door
and checking for the locked message.
9142268
A-Series, 400 Series & 200 Series
Hinged Patio Doors
Exterior
Handle
Set Screw
1/8"
Hex Key
Bushing
Active Panel
Interior
Escutcheon
11
User's Guide
Interior
Handle
Bushing
Spindle
Escutcheon
Bolt
VeriLock
Sensor
Assembly
Small
Flat Blade
Screwdriver
CR-2032
Batteries
Insert screwdriver
into slot end to
remove batteries.