CarNavi-Tech Mercedes09 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CarNavi-Tech Mercedes09. CarNavi-Tech Mercedes09 4 pagina's.

This interface can insert RGB/composite video into Mercedes 09 version monitors [Monitor with SD card slot]. So RGB

navi map or reverse camera video or

TV/DVD changer image can be displayed.

All

the

installation

plug‐and‐play.

Composite video display

Note: the pictures below are Mercedes E/ML car monitors. This interface can be also used for E/CLK/GL/ML

Mercedes cars[with SD card].

This interface box is made up of two parts, external box and internal daughter board. The internal daughter board

should be inserted onto the 60P ribbon cable to monitor, while the external box is located outside the monitor. One 50P

cable is used to connect these 2 parts.

RGB

AV1/2

CAM

CAN/POWER

Installtion：

（1） Take the monitor out from the car. For W211/220 cars, only necessary to remove the plastic with hooks, the

monitor can be taken down, on screws usually.

（2） Open the monitor's panel side in this way:

1 / 4

CarNavi-Tech Mecedes09 interface installation manual

process

60P "IN"‐side ribbon

cables to the socket.

50P ribbon

High resolution RGB‐NTSC display

60P "OUT"‐side socket to

the red original ribbon

cable.

Remove the 4 screws that

fasten the panel to the other

part of monitor.