AIRTAK SD30 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AIRTAK SD30. AIRTAK SD30 9 pagina's. Refrigerated air dryers

SPECIFICATIONS:

Refrigerant:

Maximum Inlet Pressure:

Maximum Inlet Temperature:

Minimum Ambient Temperature:

Maximum Ambient Temperature

Under normal conditions, the air dryer will run continuously when power is on. The

dryer will provide a specified pressure dew point for the compressed air system with

little maintenance or adjustments required.

Moisture and condensation will be removed from the moisture separator automatically

through the automatic drain.

Units are designed for inlet air temperature of 100°F. If the inlet air temperature

exceeds 100°F, there is a possibility of overloading the refrigerant compressor.

The allowable range for ambient temperature is 50°F to 110°F. At ambient temperature

above 100°F, refrigeration capacity will decrease with a corresponding increase in

pressure dew point. If the thermal overload switch trips out and stops the compressor,

the unit will not restart until it has cooled.

General:

A. Only qualified service people should install a compressed air dryer. Compressed

air, machinery and electricity are involved in installation; all can be dangerous if not

handled properly.

B. Upon unpacking your dryer, examine it for any external damage. If such damage

exists, report it to the delivering carrier immediately and file a freight claim with the

responsible carrier.

C. Prior to attempting installation of the dryer read the accompanying literature

thoroughly. Failure to follow the enclosed recommendations may result in invalidation

of the warranty.

D. Dryers are designed for installation and operation in typical indoor industrial

atmospheres. Do not install or operate dryers in hazardous locations or in explosive or

flammable atmospheres.

R134a

250 psig

120°F

50°F

110°F