Community C4 Installatie- en bedieningshandleiding - Pagina 14
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Community C4. Community C4 20 pagina's. 4.5", 6.5", 8" full-range c series coaxial ceiling loudspeakers
Ook voor Community C4: Installatie- en bedieningshandleiding (16 pagina's)
Pagina afdrukken
designed to drop into the Tile Bridge support
rails channels, they will not work properly if
mis-aligned. See note and Figures 12 and 13
on the next page.
Note: If you're using loose wires, rather than
conduit, irst connect the wires to the termi-
nal block atop the loudspeaker assembly, and
secure them with the top cover/strain relief,
before installing the can through the cutout
and into place.
Figure 12. Position of Loudspeaker Relative
to Bridge Support Rails During Installation
Figure 13. Drop-Stop Tabs (highlighted)
Snap Out Over Bridge Support Rails
(Temporarily holds unit in place even before
you secure it with the mounting clamps)
Community Commercial Design Series
4. Locate the two Phillips-head actuators
around the perimeter of the loudspeaker's
front lange (see Figure 14). Using a #2 Phil-
lips screwdriver twist each actuator clock-
wise until you feel resistance as the clamps
press against the ceiling bridge rails (Fig. 15).
Figure 14. Turning the two loudspeaker
clamp actuators clockwise securely locks
Figure 15. Mounting Clamps Shown Grip-
ping Tile Support Bridge Rails After the
Clamp Actuators Have Been Tightened.
Installation and Operation Manual
the unit into the ceiling.
Page 14