Anderson A-INL-032 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Anderson A-INL-032. Anderson A-INL-032 2 pagina's.

PROCEDURE REF# A‐INL‐032

How to use X‐Tractor

Preparation for finishing the bale row:

Remove the locking pin from the idle control of the engine so that it runs

at its highest RPM. Turn the hydraulic brake knob at the minimum setting.

Be sure that the steering wheels are straight, this will avoid the machine

to turn during the extraction of the bales.

Finishing the bale row:

Activate the X‐Tractor with the control lever on the main valve. As soon as

the X‐Tractor head comes in contact with the last bale, you'll have to

manually activate the hoop to finalise the bale row. Once you are done

with wrapping, open the safety gate to cut plastic film on each stretcher

(The engine will automatically turn off because of the safety switch). Close

the gate and start the engine to finally extract the bale row.

Completely push off the last bale:

Activate the X‐Tractor and push the row until the last bale is free of the

wrapper (around 25 seconds). Retract the X‐Tractor until it returns to its

home position. Move the wrapper away from the bale row so that you can

close the end bag without having to climb on the front rollers of the

wrapper.