Community V2-3564 Installatie- en bedieningshandleiding - Pagina 6

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Community V2-3564. Community V2-3564 9 pagina's. V series

RIGGING / SUSPENSION AND SAFETY

The terms "rigging", "flying" and "suspension" are often used interchangeably

in describing methods of installing loudspeaker systems at elevated positions.

IMPORTANT NOTES ON RIGGING LOUDSPEAKERS

There are three areas of responsibility for rigging loudspeakers. The first is

the building structure. Always consult with the building architect or structural

engineer to assure the ability of the structure to support the loudspeaker

system. The second area of responsibility is the loudspeaker itself. Community

certifies its loudspeaker systems and rigging accessories for suspension when

they are properly installed according to our published guidelines. The third

area of responsibility is everything between the loudspeaker and the building

structure and the actual process of installation. The installing contractor

assumes this responsibility. Loudspeaker rigging should be performed only by

certified rigging professionals using certified rigging hardware chosen for the

specific application. Prior to installation, the contractor should present a rigging

plan, with drawing and detailed parts list, to a licensed structural engineer (P.E.)

or architect for written approval.

DANGER: Some of the loudspeakers described in this manual are may be

suspended using a variety of rigging hardware, means, and methods. It is

essential that all installation work involving the suspension of these

loudspeaker products be performed by competent, knowledgeable persons

who understand safe rigging practices. Severe injury and/or loss of life may

occur if these products are improperly suspended.

DANGER: All rigging fittings must remain sealed with the included flat-

head Allen screws or they must be fitted with properly rated optional

mounting hardware. Any missing fasteners will compromise the

structural integrity of the enclosure and constitute a safety hazard. Do not

suspend this loudspeaker unless all fasteners are securely in place!

WARNING - NON-COMMUNITY RIGGING HARDWARE: Non-Community

hardware used for rigging the V SERIES subwoofers must be certified by

the supplier for this use and must be properly rated for safety.

Page 6

VLF Owner's Guide

V SERIES models