Bosch WTA34 Series Instructies voor reparatie - Pagina 12
Blader online of download pdf Instructies voor reparatie voor {categorie_naam} Bosch WTA34 Series. Bosch WTA34 Series 15 pagina's. Vented tumble dryer
Pagina afdrukkenTUMBLE DRYER
Error
Error display
no.
Re 14
15
Appliance does not
start.
16
Button, display or
programme selection
malfunctions
occasionally.
17
Filter LED flashes,
filter is clean.
r120085e -15/12
04.99
Possible cause
A
Door switch F1 and / or
locking mechanism
defective.
B
Power module defective.
Operating module defective. Activate test mode;
Operating module or power
module defective.
A
Overheating
B
NTC R2 or NTC R4
defective.
Test / Procedure
Remove plug X11–1 from
the power module.
Test switch, cable, plug and
mechanism
– Locking hook
– Bowden cable
– Door button
Remove plug from the
power module, short-circuit
Pin 7 and 5 on plug-and-
socket connection X11–1 on
the power module and start
any drying programme.
If the appliance starts, the
power module is o.k.
If this mode can be
activated, the operating
module is o.k. Check
whether the circuit board
has become detached from
the operating module.
If not, continue with Error
number 15.
Start "extra dry" and "very
dry" test programmes.
See Error number 4.
Remove the cable from the
power module.
Test NTC, cable and plug-
and-socket connection.