Bosch WTA74202ID Handleiding voor installatie en gebruik - Pagina 30
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Bosch WTA74202ID. Bosch WTA74202ID 40 pagina's.
Pagina afdrukken
Signal setting
en
Dry the fluff filter, close it and reinsert
6.
the fluff filter.
Caution!
The dryer may be damaged.
Do not operate the dryer without a fluff
filter or if the fluff filter is defective.
30
M
Signal setting
You can change the following settings:
S i g n a l s e t t i n g
The spin speed that is used for
■
spinning your laundry before it is
dried,
The volume of the audible signal at
■
the end of the program,
The volume of the audible button
■
signals.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
Switch the dryer on.
1.
Select the "Cottons" programme in
2.
position 1 and wait for five seconds.
The symbols go out in the display panel
and the programme duration is
displayed.
Press and hold the Start button and,
1.
at the same time, turn the
programme selector clockwise to
position 2.
The spin speed is shown in the
2.
display.
Press the "Finish in" time button or
3.
the drying time button to change the
spin speed.
Turn the program selector clockwise
4.
to position 3.