Dreamline ENIGMA-Z SHDR-62487610 Series Handleiding voor installatie-instructies - Pagina 17

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dreamline ENIGMA-Z SHDR-62487610 Series. Dreamline ENIGMA-Z SHDR-62487610 Series 20 pagina's. Shower door & tub door

Pagina afdrukken

. Press the Anti-water strip (#14) on the vertical edges of the

Stationary glass (#02) and the Glass door (#05). Also press the

Bumper seal strip (#13) on the vertical edge of the Glass door

(#05).

Mount the Handle (#06) to the Door Glass (#05).

Adjust both Door stoppers (#01) to ensure that they are positioned

upright and the Glass door (#05) is in its maximum opening and

closing range. Apply thread lock to the set screws and tighten the

set screws to fasten them in place.

Adjust the Roller guards (Fig 18) on both Roller assemblies (#04)

to within 1/16" of the Upper guide rail (#03) to ensure that the

Glass door (#05) is secure.

NOTE: The Door stoppers (#01) must be positioned correctly to

prevent the handle from contacting the Stationary glass (#02)

and to stop the Door glass (#05) in a position that allows the

bumper strip to create a seal with the wall, but does not allow

the door glass to bang into the wall.

Observe the correct position of these stoppers and re-position if

necessary.

17.

Door Stopper Installation:

1. Loosen the set screw

2. Slide the Door Stopper (#01) onto the Upper Guide Rail (#03)

3. Align with stopper hole (stationary panel side only)

4. Apply Thread lock adhesive (#20) to the set screw threads

5. Tighten screw into the stopper hole (stationary panel side only)

6. Correctly position and tighten screw into the stopper (door side)

Stopper

ENIGMA-Z manual Ver 1 Rev 4 10/2016

See Fig. 20 for details

Panel side

See Fig. 21 for details

Stopper

hole

(Right hand door installation shown as example)

Fig. 21

Door

Panel

Fig. 20

1/16"

*Roller guards must be tight and

the distance beneath the guide rail

should be approximately 1/16" max.

Door side

Stopper (#01)