Andesfit Health ADF-B27 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Andesfit Health ADF-B27. Andesfit Health ADF-B27 18 pagina's.

BEFORE YOU BEGIN

Installing the battery

1. Open the battery cover on the back of meter.

2. If replacing the batteries, please remove the used batteries.

3. Insert 2 new (AAA) batteries with correct +/- direction.

4. Close the battery cover.

Environment Protection – Waste electrical products should not

be disposed of with household waste. Please recycle where

facilities exist. Check with your local Authority or retailer for

recycling advice.

■ The system is intended for use outside the body (in vitro

diagnostic use). It is for single-patient use. It should be used only

for testing glucose (sugar) and only with fresh capillary whole

blood samples taken from the finger and the alternative sites

including the palm, the forearm. The system is intended for use

at home. It should not be used for the diagnosis of diabetes or

for the testing of newborns.

■ The System is to be used by a single person and should not be

shared.

■ The System is intended for self-testing outside the body (in vitro

diagnostic use) by people with diabetes at home as an aid to

monitor the effectiveness of diabetes control. The System should

not be used for the diagnosis of or screening for diabetes, nor for

neonatal use. Alternative site testing should be done only during

steady – state times (when glucose is not changing rapidly).

■ The ADF-B27GTS Test Strips are for use with the Blood Glucose

Meter to quantitatively measure glucose in fresh capillary

whole blood samples drawn from the fingertips, palm,forearm.

■ The control solutions is intended for use with the System,

to check that the glucose meter and test strips are working

properly and that you are doing the test correctly.These solutions

contain a known range of glucose, as indicated on the strips vial

bottles.