ANDILOG CENTOR FIRST II Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ANDILOG CENTOR FIRST II. ANDILOG CENTOR FIRST II 12 pagina's.

2. Handling

The usual functions (displaying force, displaying maximum, zeroing and changing units) are accessible

2.1.

by simply using the keys on the keyboard.

Connect the AC adapter to the micro-USB connector on the left side of your force gauge. The green

LED on the front panel lights up when the battery is charging. At the end of the charge, the LED goes

out.

2.2.

Attach the extension cable provided in the case to the load cell rod at the bottom of the force gauge.

Tightening should be done by hand without applying much torque. Excessive torque or the use of pliers

can damage the load cell. We recommend that you mount the accessories with the force gauge turned

on to ensure that you are not applying a heavy load on the sensor when mounting the accessories.

2.3.

On the back of the force gauge are 2 M5 threaded holes that can be used to mount the force gauge on

an ANDILOG frame. Each ANDILOG frame is delivered with a special spacer and the fixing screws for

this use.

If you wish to use another type of frame, make sure that the screws used are no longer than 3mm.

Although the threaded holes are blind, the use of longer screws may destroy the components on the

electronic board inside the instrument.

Accessories assembly

- 6 -

User's manual

CENTOR FIRST II