Andino X1 Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} Andino X1. Andino X1 15 pagina's. Raspberry pi extension with integrated signal preprocessing
Pagina afdrukkenOpening the housing cover
The housing cover is held by four clamps. To ensure a good hold of the lid, the clips are relatively tight.
Pull the brackets one after the other on one side and slightly lift the lid.
Repeat the process on the other side. Do not use force.
When mounting the cover, please note the cutouts. The lid can not be twisted.
Insert the Raspberry Pi
The Raspberry Pi is placed on the head, lying on the pin header. Raspberry Pi 2 or 3 Model B can be
used. The power supply of the Raspberry Pi is taken over by the internal voltage transformer.
We recommend the use of heat sinks for the CPU and the USB hub chip of the Pi!
Clear Systems GmbH • Schweinthal 25 • 91349 Egloffstein • Tel. (09197) 23 53 23 5 •
Stand: 07.01.2019
www.andino.systems
•Seite: 9/15