Caroma E Touch G16000E6A Handleiding voor installatie- en onderhoudsinstructies - Pagina 3

Blader online of download pdf Handleiding voor installatie- en onderhoudsinstructies voor {categorie_naam} Caroma E Touch G16000E6A. Caroma E Touch G16000E6A 19 pagina's. Electronically operated mixer/tap

Pagina afdrukken
I M PO R T ANT
PrESSurE & TEMPEraTurE rEquirEMEnTS
1.
Hot and cold water inlet pressures should be equal.
2.
Static inlet pressure range: 150-800 kPa - new Regulation: 500 kPa maximum
static pressure at any outlet within a building (Ref. aS/nZS 3500.1-2003, clause
3.3.4)
3.
Maximum hot water temperature: 70°c
DEck rEquirEMEnTS
1.
deck thickness: 35mm maximum
2.
tap body hole (in deck): Ø34-Ø36mm

PowEr rEquirEMEnTS

Battery operation: IP67 Battery Back Up Box (9V batteries not included)
Mains operation: 240V 50Hz 3 pin socket
iMPorTanT inforMaTion
1.
not suitable for gravity feed systems
2.
tapware is fitted with a flow regulated aerator insert. this low flow rate may
not be suitable for connection to some instantaneous Gas Water Heaters, some
tempering Valves, some Solar Water Heaters & some thermostatic Mixing
Valves. check with the manufacturers of these products.
3.
Isolating stop taps must be fitted to the hot & cold water supply connections.
(Part no. 842018c - Mini cistern 1/4t)
4.
all pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
5.
Flexible tails have a left hand thread connection to tap/mixer body. Rotate
clockwise to remove.
TEchnical DaTa
1.
activation: touch (Piezo technology)
2.
default flow time: 8 seconds (adjustable)
3.
Flow time range: 1- 60 seconds (Programmable)
3