Caroma G Series Installatie- en onderhoudshandleiding - Pagina 9

Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Caroma G Series. Caroma G Series 17 pagina's. Electronic soap dispenser
Ook voor Caroma G Series: Handleiding voor installatie- en onderhoudsinstructies (16 pagina's), Handleiding voor installatie- en onderhoudsinstructies (16 pagina's), Installatie- en onderhoudshandleiding (16 pagina's)

INSTALLATION

IMPORTANT: Product was supplied with a self adjusting sensor. The ideal sensor range for the specific location will

be set automatically.

Before proceeding, check that no objects are in front of the sensor

besides the washbasin.

Connect the transformer to the transformer socket in the dual

power input box and plug it into the electricity socket.

Connect the four contacts connector to the dual power input box.

Important: Make sure that the 4 contacts connector is connected

all the way through.

After you have connected the four contacts connector to the dual

power input box, wait 15 seconds in order to allow the system to

set the ideal sensor range.

As an indication that the self adjusting has taken place a LED in the sensor eye will flash continuously. The solenoid valve

will open and close for 1 second as an indication that the ideal sensor range is set and the product is ready for use.

Connect flexible hose (not supplied) from the mains water supply

to the dual power input box with inlet (remove nipple and ensure

filter is refitted)

Turn on the mains water supply and check for leaks.

If the automatically adjusted sensor range is not satisfactory,

please refer to the section entitled "Settings adjustment".

CONNECTING THE WATER SUPPLY

OBJECT

Now, remove the protective sticker

that covers the sensor.

O-RING VISIBLE – NOT CONNECTED PROPERLY

ONLY THE GROOVES ARE VISIBLE – CONNECTED PROPERLY

ABOUT

SECONDS