Comnet CLFE16UTP Installatie- en bedieningshandleiding - Pagina 2
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Comnet CLFE16UTP. Comnet CLFE16UTP 9 pagina's. Ethernet-over-utp/twisted pair extender with pass-through poe
Pagina afdrukkenINSTALLATION AND OPERATION MANUAL
FIGURE 1 – CLFE1UTP
CAT5/6
UTP
FIGURE 2 – CLFE1UTP
LEFT PANEL
For 1-pair mode, use the first pair of pins (pins 1 & 2) of the
"Extended Ethernet" RJ-45 port on the left panel.
Note: 4-pair mode is required for PoE.
FIGURE 3 – CLFE4UTP
LEFT PANEL
TECh SUPPORT: 1.888.678.9427
2 1
CAT5/6 or UTP
CAT5/6
RIGHT PANEL
Ground
Screw*
* WARNING: A ground connection is
required for the surge protection to work.
Failure to ground properly voids the
warranty and may cause damage.
RIGHT PANEL
* WARNING: A ground connection is
required for the surge protection to work.
Failure to ground properly voids the
warranty and may cause damage.
CLFE(X)UTP
CAT5/6
–
PoWER SUPPLy
CoNNECTIoN
+
via external power adaptor
Optional, if there
is no power supply
connected to the unit
it will try to detect PoE.
Note: Center
pin on power
connector is
positive (+).
Ground
Screw*
INS_CLFEXUTP_REV–
09/28/11
PAGE 2