ATK 1988 406 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ATK 1988 406. ATK 1988 406 20 pagina's.

DRIVE CHAIN

CHAIN TENSION

Shift the transmission into neutral. Check the slack in the upper

drive chain midway between the A-Trak top roller and the rear sprocket.

Drive chain slack should

adjusted to allow

3/4 inch (44111) vertical

•ovement by hand as shown on Figure 6. This minimal slack requirement

is due to the design characterist1c of the ATK chain torque eliminator.

CHAIN MAINTENANCE

The drive chain should

checked, cleaned, and lubricated after every

ride. Never use an engine degreaser or solvent on the chain to clean it,

this may aamage the rubber o-rings. When lubricating the chain always use

a lube designed for o'ring chains. The A-Trak chain torque eliminator

rollers are maintenance free.

r/GUl?E 6

4-1

FIGURE 6