Drehmo 384771 Extra handleiding - Pagina 5

Blader online of download pdf Extra handleiding voor {categorie_naam} Drehmo 384771. Drehmo 384771 12 pagina's. Simc with limit switching unit

1. COMMISSIONING

DANGER

Exceeding the maximum permitted torque

DANGER

Regard the permitted torque range for additional gears, if

used

1.2 Setting the limit positions

For setting the limit positions for OPEN and CLOSE, use the setting screws as shown in

ﬁgure 1.2.

For setting a limit position, operate the actuators into the desired position. Press the screw

downward by means of the screwdriver and turn in direction of the arrow. The limit posi-

tion is set when the cam operates the appropriate limit switch. After the setting procedure,

release the screw.

Setting screws for limit positions engage in short intervals while being turned. Once cam

Additional operating manual

A setting above the maximum permitted torque is not permit-

ted.

For actuators that are delivered with an additional gear or

thrust unit by the manufacturer, the permitted torque range is

written outside the housing cover.

Figure 1.2: Limit switches in standard version

1. Setting screw for limit position

OPEN

2. Setting screw for limit position

CLOSED