Electrolux ZUNN18ES1 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Electrolux ZUNN18ES1. Electrolux ZUNN18ES1 20 pagina's.

Pagina afdrukken

Overall space required in use ³

³ the height, width and depth of the appliance

including the handle, plus the space

necessary for free circulation of the cooling

air, plus the space necessary to allow door

opening to the minimum angle permitting

removal of all internal equipment

* including the width of the bottom hinges (8

mm)

3.2 Location

To ensure appliance's best functionality, you

should not install the appliance in a place with

direct sunlight. Do not install the appliance

close to radiators or cookers, ovens, or hobs,

unless otherwise specified in the installation

instructions.

Make sure that air can circulate freely around

the back of the cabinet.

This appliance should be installed in a dry,

well ventilated indoor position.

This appliance is intended to be used at

ambient temperature ranging from 10°C to

43°C.

The correct operation of the appliance

can only be guaranteed within the

specified temperature range.

If you have any doubts regarding where

to install the appliance, please turn to the

vendor, to our customer service or to the

nearest Authorised Service Centre.

It must be possible to disconnect the

appliance from the mains power supply.

The plug must therefore be easily

accessible after installation.

ENGLISH

3.3 Electrical Connection

1071

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be

observed.

The wires in the mains lead are coloured in

accordance with the following code:

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains lead

of this appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows:

1. Connect the wire coloured green and

2. Connect the wire coloured blue to the

3. Connect the wire coloured brown to the

4. Check that no cut, or stray strands of wire

CAUTION!

WARNING!

yellow to the terminal marked either with

the letter "E" or by the earth symbol

coloured green and yellow.

terminal either marked with the letter

"N" or coloured black.

terminal either marked with the "L" or

coloured red.

is present and the cord clamp (E) is

secure over the outer sheath.