Electrolux EHC644BE Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Electrolux EHC644BE. Electrolux EHC644BE 20 pagina's.
Pagina afdrukken
OPERATING INSTRUCTIONS
IMPORTANT!
When you activate the zone but do not activate the outer
ring the light that comes out from the zone may cover the
outer ring. It does not mean that the outer ring is activated.
To see if the ring is activated check the indicator.
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor
field, can be locked at any time in order to prevent the
settings being changed e.g. by wiping over the panel with
a cloth.
Switch on
Switch off
IMPORTANT!
When you switch the appliance off, the locking function is
automatically switched off.
Using the automatic heat up function
Activate this function to get a desired heat setting in a
shorter time. When it is one, the zone operates at the
highest setting in the beginning and then continues to cook
at the desired heating setting.
To activate the function for a cooking zone, press
comes on). Immediately touch a desired heat setting.
After 3 seconds,
Keep warm
The
function sets all cooking zones that operate to the
lowest heat setting (
change the heat setting.
does not stop the timer function.
•
To activate this function touch
•
To deactivate this function touch
that you set before comes on.
•
IMPORTANT!
To activate the function, the cooking zone must be cold.
The child safety device
The child safety device prevents unintentional use of the
appliance.
Control panel
Touch
Touch
comes on.
). When
operates, you cannot
.
comes on.
. The heat setting
(CONTINUED)
Display
(for 5 seconds)
the previously set heat setting
Switching on the child safety device:
•
Start the hob with
•
Touch
•
The child safety device is switched on.
Switching off the child safety device:
. (
•
Start the hob with
Touch
•
Stop the hob with
•
The child safety device is switched off.
IMPORTANT!
The child safety device can only be switched on and off, if
no heat setting is set.
Overriding the child safety device:
The child safety device can be switched off in this way for a
single cooking session; it remains activated afterwards.
•
Start the hob with
•
Touch
Until the appliance is next switched off, it can used as
normal. After switching off the appliance, the child safety
device is active again.
IMPORTANT!
After overriding the child safety device, a heat setting or a
function must be set within approx. 10 seconds, otherwise
the appliance automatically switches itself off.
. Do not set the heat settings.
for 4 seconds. The symbol
. Do not set the heat settings.
for 4 seconds. The symbol
.
. The symbol
for 4 seconds. The symbol
9
comes on.
comes on.
comes on.
comes on.