Advanced micro peripherals DVICOMP-IS Hardware referentiehandleiding - Pagina 16
Blader online of download pdf Hardware referentiehandleiding voor {categorie_naam} Advanced micro peripherals DVICOMP-IS. Advanced micro peripherals DVICOMP-IS 17 pagina's. Dvi to composite scan converter board
Pagina afdrukken2: Installation
2
LEVEL1 – links 5-6 and 7-8
Used for PCI card interrupt selection.
The settings of the third and fourth links on the LEVEL header determine which of
the four PCI interrupts service the mini PCI module hosted on the DVICOMP-IS
card.
The following configurations are valid.
Jumpers
Cable set
The DVICOMP-IS may be supplied with a DVI breakout board that plugs into the
TMDS connector via a flat flex cable (part CABLE-STANAG/TMDS).
A composite output cable may also be included in the form of a BNC to MMCX co-
axial lead (part CABLE-ST-MMCX-TO-BNC-S). The MMCX connector interfaces
with the COMP header on the board.
© 2018 Advanced Micro Peripherals
Document version A.01
Interrupt
INTA
INTB
INTC
INTD
DVICOMP-IS Hardware Reference Manual
Default setting:
16