Dremel 3D20 Idea Builder Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dremel 3D20 Idea Builder. Dremel 3D20 Idea Builder 8 pagina's. Unclogging
Ook voor Dremel 3D20 Idea Builder: Snelstarthandleiding (8 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (2 pagina's), Handleiding voor probleemoplossing (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken
Dremel 3D20 Idea Builder Snelstarthandleiding
1
Unboxing
1
2
5
Getting Ready to Build (continued...)
LEVELING BUILD PLATFORM
1. Tap "Tools" on your Dremel 3D20's touch screen and
tap "Level" .
3
2. First level the front left of the build platform.
3. Place the leveling sheet between the extruder and build
platform.
a) If the leveling sheet cannot slide between the extruder
and build platform, turn the knob counterclockwise until
you can slide the leveling sheet between the extruder and
build platform with some resistance.
3
b) If the leveling sheet can slide between the extruder and

Getting to Know Your Dremel 3D20

build platform too easily, turn the knob clockwise until you
can slide the leveling sheet between the extruder and build
platform with some resistance.
4. Tap "Next" to move the build platform toward the right knob
2

Kit Contents

Dremel 3D20
Instruction Manual
English
Spool Lock
Power Cable
Build Tape
Object Removal Tool
TIP:
Save your Dremel 3D20 packaging for future transportation and storage.
1
8
1
3
3D20
Quick Start Guide
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE
WARNING
WARNING
DREMEL 3D20 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS
MAY RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
Quick Start Guide
1 Filament Spool
USB Cable
SD Card
0.3mm
LEVELING SHEET
Unclog Tool
Leveling Sheet
STEP 1: LEFT ADJUSTMENT
TURN
LEFT
TO
RAISE
THE BUILD PLATFORM
TURN
RIGHT
TO
LOWER
THE BUILD PLATFORM
2
TURN LEFT TO RAISE
THE BUILD PLATFORM
TURN RIGHT TO LOWER
1.
Lid
Adjust the platform until
leveling tool slides between
the extruder and platform
with some resistance
TURN LEFT TO RAISE
THE BUILD PLATFORM
TURN RIGHT TO LOWER
WARM
NEXT
BACK