Dremel 3D20 Idea Builder Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dremel 3D20 Idea Builder. Dremel 3D20 Idea Builder 4 pagina's. Unclogging
Ook voor Dremel 3D20 Idea Builder: Snelstarthandleiding (8 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (2 pagina's), Handleiding voor probleemoplossing (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

3. Replace the back left screw, through the bottom of the

turbo fan mount, into the bottom of the extruder mounting

carriage.

2610038113

Congratulations!

You are now ready to build. Build On.

4. Insert the 2.5mm hex screw onto the fan baffle and guide

the fan baffle into place on the extruder. Tighten the screw

to mount the fan baffle on the extruder.

5. You have now successfully installed the new hot-end

assembly.

08/16