Dremel 3D40 Idea Builder Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dremel 3D40 Idea Builder. Dremel 3D40 Idea Builder 2 pagina's. Clogged heatsink tube replacement
Ook voor Dremel 3D40 Idea Builder: Instructies (5 pagina's), Handmatig (4 pagina's), Service-instructies (2 pagina's)

Pagina afdrukken
Dremel 3D40 Idea Builder Snelstarthandleiding
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE
WARNING
WARNING
DREMEL 3D40 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS MAY
RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
1
Unboxing
1
3
5
3
Getting to Know Your Dremel 3D40
1
2
1
2
12
12
11
11
8
7
10
9
6
10
9
6
22
23
24
24 25 26
4
Getting Ready to Build
OBSERVE ALL PROVIDED WARNINGS AND SAFETY
WARNING
WARNING
INSTRUCTIONS WHEN USING THE DREMEL 3D40. FAILURE
TO DO SO MAY RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE OR
PERSONAL INJURY.
FILAMENT INSTALLATION
1. Ensure the power switch is in the o position.
2. Twist spool door counter-clockwise and remove.
3. Place filament spool onto spool holder with spool being fed
from the bottom towards the back of the Dremel 3D40.
4. Thread filament through filament guide tube and replace
spool door.
5. Insert the filament coming from the filament guide tube into
the extruder intake.
6. Plug power cord into outlet and turn on power switch.
7. Tap "Filament" on your Dremel 3D40's touch screen and wait
for extruder to heat.
8. When Feed Filament screen appears, tap "Next" and thread
filament into extruder intake until extruder feeds through on
its own.
9. When new filament appears from extruder tip, tap "Done" to
complete filament load process.
English
Quick Start Guide
2
4
14
15 16 17 18 19
13
3
3
4
4
21
5
5
22
27
28
25
26
FIG. 1
3
7
9
SIDE 1
2
Kit Contents
Dremel 3D40
Instruction Manual
1 Filament Spool
Power Cable
Build Tape
Object Removal Tool
WARNING:
In case your printer needs to be sent to a service
center, please contact customer service for packaging instructions
before shipping your printer. Please use the provided inlay and
package as per instructions or the warranty will be void.
1.
Lid
2. Extruder
20
3. Z-Axis Guide Rail
4. Door
5. Gripping Handles
6. USB A Port
7.
Leveling Knobs
8. Build Platform Clip
9. Touch Screen
10. Build Platform
11. Filament Spool Holder
12. Filament Spool
13. Y-Axis Guide Rail
14. Stepper motor
15. Filament Guide Tube
16. Extruder Lever
23
17. Filament Guide Clip
18. Extruder Intake
19. Extruder Fan
20. Ribbon Cable
21. X-Axis Guide Rail
22. Leveling Sensor
23. Extruder Tip
24. Power Switch
25. USB B Port
26. Ethernet Port
27. Nameplate
28. Power Input
Spool
Holder
Open
Filament
Filament
Close
Guide Tube
!
FILAMENT
LEVEL
!
PRESS DONE WHEN
NEW COLOR APPEARS
DONE
BACK
HOME
ENGLISH
Quick Start Guide
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE
WARNING
WARNING
DREMEL 3D40 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS MAY
RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
Quick Start Guide
USB Cable
USB Flash Drive
Unclog Tool
Filament
Extruder
Guide Tube
Filament
Guide
Intake
5
!
FEED FILAMENT
NEXT
BACK
HOME
8
PRESS COLORS
PMS 8402
PMS 286
PMS 151
BLACK
21996 Dremel 3D40 Quick Start_ENGLISH.ai
21996
SMW
1.11.16