Atlanta ATH-2431 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Atlanta ATH-2431. Atlanta ATH-2431 20 pagina's.

Pagina afdrukken
4. Tightly close the top of the kettle otherwise the kettle won't switch off when
boiling.
5. Put the kettle on the base plugged in. The design of the kettle makes it possible
to put it on the base from any side.
6. Push ON pushbutton (С). Operating indicator is ON (G).
7. Wait till water is boiling. The kettle will switch off automatically. Boiling process
may be stopped manually at any time. In order to make repeated boiling, it is
necessary to wait a while, till the kettle get cold a little and heat-sensing device
arrives to home position.
8. Don't open the top in the process of boiling and immediately after in order to
avoid thermal injury.
NOTES
1. Never fill the kettle with any liquid except water.
2. Be money-saving: don't boil more water than you need. This will reduce power
consumption and increase the operating life of the kettle.
3. Condensate may appear in the kettle in the course of operation.
4. Never heat the kettle on gas or electric stove.
5. The kettle shall be used only with the base completed with the supply.
6. The manufacturer reserves the right to make change in the kettle's design.
CLEANING AND CARE
•
The kettle must be cleaned regularly in order to remove calciferous sediments. A
bulk of sediments on a heating element can cause a breakage of the kettle.
•
Plug out the kettle and let it cool down, then clean it with a wet cloth using soda.
Do not use reactive and abrasive detergents as they can damage a surface of the
kettle.
•
Do not use tools when cleaning the kettle.
•
The kettle must be thoroughly washed after cleaning.
•
Never put the device into water or another liquid.

ENVIRONMENTAL PROTECTION

The old devices are the package of the technical materials;
therefore they can not be recovered with the domestic waste!
On that reason, please, support us in the resources saving and
environmental protection and return the unit to the recycling
center (if applicable).
INSTRUCTION MANUAL
6