Dremel MS20-01 Gebruiksaanwijzing/veiligheidsinstructies - Pagina 11

Blader online of download pdf Gebruiksaanwijzing/veiligheidsinstructies voor {categorie_naam} Dremel MS20-01. Dremel MS20-01 20 pagina's.

Find Quality Products Online at:

To remove the Moto-Saw for

hand held use

1. Unplug the Moto-Saw.

2. Press the release lock release button at

the rear of the saw station work surface.

3. Slide the Moto-Saw back to release from

the lock mechanism.

4. Pull the Moto-Saw up from the saw station

and pull the cord through the saw station.

Installing Dust Extraction

When connecting tool to dust collection and

extraction systems, be sure these are

connected and used according to tool and

vacuum instructions. Proper use of dust

collection systems maximizes effectiveness.

Do not use dust extraction when working on

metal. Particles from sanding, grinding or

cutting metal may be hot and may spark

which may melt plastic adaptors, vacuum

hoses, and may cause a fire inside the

vacuum bag/tank.

Position vacuum hoses such that you do not

block the power switch. You must maintain

clear access to the ON/OFF switch for full

control.

Your Moto-Saw includes a vacuum dust

adapter. The adaptor can be used to connect

the vacuum hose to either the left or the right

side of the tool, Fig. 11.

The outside of the adaptor can be used to

connect 1 5/8 in. and the inside of the

adapter can be used to connect 1 3/8 in.

1. Attach dust extraction adaptor onto saw

station.

2. Attach vacuum hose to vacuum adaptor.

To remove, reverse instructions.

GlobalTestSupply

www.

FIG. 10

FIG. 11

.com