Compac A28-HC G1 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Compac A28-HC G1. Compac A28-HC G1 8 pagina's. Air-hydraulic jack
Ook voor Compac A28-HC G1: Gebruiksaanwijzing (18 pagina's)

Pagina afdrukken
Use of the jack:
Transport:
Transport:
Transport:
Transport:
The handle can be placed in 3 different positions by pulling the lever and moving the handle.
Lifting a load:
Lifting a load:
Lifting a load:
Lifting a load:
The operating valve on the top of the handle should be turned slowly to the right,
the pump is activated and the jack lifts.
Lowering the load:
Lowering the load:
Lowering the load:
Lowering the load:
The operating valve on the top of the handle should be turned slowly to the left and the jack lowers.
After use always be return the lifting cylinder to its lowest position to protect the cylinder.

Maintenance:

IMPORTANT: Like other pneumatic tools the air pump of the jack needs oil for lubricating the
IMPORTANT:
IMPORTANT:
IMPORTANT:
moving parts. It is important to use a built-in air lubricator and water separator (filter) on the air
supply nearby the air connection on the Jack.
Moisture and water may damage the jack even after a short time.
USE ONLY ONE OF THE FOLLOWING TYPES OF OIL
USE
ONLY ONE OF THE FOLLOWING TYPES OF OIL IN THE AIR LUBRICATOR
USE
USE
ONLY ONE OF THE FOLLOWING TYPES OF OIL
ONLY ONE OF THE FOLLOWING TYPES OF OIL
100, MOBIL DTE 27, ESSO TERESSO100, SHELL TELLUS 100, BP ENERGOL HP 100. 0. 0. 0.
100, MOBIL DTE 27, ESSO TERESSO100, SHELL TELLUS 100, BP ENERGOL HP 10
100, MOBIL DTE 27, ESSO TERESSO100, SHELL TELLUS 100, BP ENERGOL HP 10
100, MOBIL DTE 27, ESSO TERESSO100, SHELL TELLUS 100, BP ENERGOL HP 10
Weekly
Weekly
Weekly: : : : Lubricate the air motor by injecting a little oil into the air connection. Lubricate the cylinder
Weekly
wall and spread the oil by lifting to maximum position.
Monthly: Lubricate all moving parts with a few drops of oil. At the same time inspect the jack and
Monthly:
Monthly:
Monthly:
extensions for damage and wear and tear.
Refilling of oil: Unscrew the filling plug at the side of the jack to refill. Correct oil level is up to the
Refilling of oil:
Refilling of oil:
Refilling of oil:
lower edge of the hole. The jack must be in horizontal position and cylinder in lowered position.
Quantity of oil: Please see under "Services" on www.compac.dk for correct oil level.
Any good hydraulic oil of viscosity 10˚-32˚cST/40˚C can be used.
NEVER USE BRAKE FLUID!
NEVER USE BRAKE FLUID!
NEVER USE BRAKE FLUID!
NEVER USE BRAKE FLUID!
IN THE AIR LUBRICATOR: AGIP OSO
IN THE AIR LUBRICATOR
IN THE AIR LUBRICATOR
: AGIP OSO
: AGIP OSO
: AGIP OSO
3