Compac Furniture C104 Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Compac Furniture C104. Compac Furniture C104 16 pagina's. 4 drawer chest

STEP 13 -

ATTACH DRAWER BACK

•

Fit the Drawer Bottom Support into place underneath the Drawer Bottom, the H1 Connecting Bolt in the centre back

of the Drawer Front will fit up into the H3 Small Cam.

•

Turn the H3 Small Cam in a clockwise direction to lock the Drawer Bottom Support in place.

•

Fit the Drawer Back into place between the Drawer Sides. The groove in the Drawer Back will fit over the end of the

Drawer Bottom.

•

Secure the Drawer Sides and Drawer Bottom Support to the Drawer Back with five H9 Screws as shown below.

Drawer Back

2 x H9 Screws

STEP 14 -

ATTACH THE DRAWER SLIDES

•

Turn the drawer upside-down as shown and attach the Drawer Slides (DR and DL) with the four H6 Small Woodscrews

as shown below. Ensure that the ends of the slides without the wheels are hard up against the back of the drawer front

as shown. Each slide requires two screws.

H6 Small Woodscrew

LH Drawer Slide (DL)

For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858

H9 Screw

H6 Small Screw

2 x H9 Screws

Drawer Bottom Support

RH Drawer Slide (DR)