AirTech ACR35 Instructies voor installatie en bedrading - Pagina 5

Blader online of download pdf Instructies voor installatie en bedrading voor {categorie_naam} AirTech ACR35. AirTech ACR35 13 pagina's.

Pagina afdrukken

If the buttons are pressed the display goes from prism mode to direct view mode and

menu activated. If the buttons are not pressed for 30 seconds the display reverts to

prism mode.

The

(Up) button is used to increase the value of a

setting, the

(Down) button is used to reduce the value

of a setting and the

advance to the next menu item.

The fan has the following 'menu' modes:

 Standard (press any button from normal runtime -

 Advanced/Engineer (hold

 Data-logger readout (hold

Standard settings:

Display

Configuration

text

Option

r‐n

Rotate display

trI

Trickle speed

adjustment

bSt

Boost speed

adjustment

b15

Boost Overrun

time

h70

Humidity level

trigger

F‐0

Fan Control Mode F‐0 = CV disabled, wall /

c‐n

Comfort mode

unl

Enable / disable

lock code

‐‐‐

Menu lock code

cod

*If "0" is selected, the fan switches to Intermittent mode.

(Mode/Set) button is used to

for 5 seconds from the standard menu)

for 5 seconds from standard menu)

Selections

r‐Y = display rotated

100mm: 0*, 5 to 30 l/s (Max limited by Boost Selection)

100mm: 6 to 35 l/s (Min limited by Trickle Selection)

b0 to b30 – 0 to 30 minutes (0 disables overrun)

h40 to h90 ‐ 40% to 90% relative humidity

window installation

c‐n = normal LS overrun

loc ‐ lock code enabled

Up / down selects current digit, X moves to next digit.

To change the lock code when "cod" is displayed select the up/down

buttons to select a digit then select X to move on to the next digit.

r‐n = display normal

F‐1 = CV disabled,

ducted installation

c‐Y = comfort mode

unl ‐ lock code disabled

(unlocked)

)

Default

9l/s

15 l/s

70%

F‐2 = CV Constant

Volume enabled

10c

r‐n

F‐0

c‐n

unl