Atlantic Doris mixte Ventilo with Fancombination Gebruikers- en installatiehandleiding - Pagina 14

Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} Atlantic Doris mixte Ventilo with Fancombination. Atlantic Doris mixte Ventilo with Fancombination 18 pagina's. Electronic towel-drying heater - electric and combined versions

Pagina afdrukken

4) Programming

The device can be controlled remotely if its pilot wire is connected to a device fitted with a programmer,

a programming unit or an energy management unit.

Chart indicating the orders the device can receive over its pilot wire

Orders received Current absent

Ref/neutral

oscilloscope

Mode achieved

Heating

temperature

1) Description of the lower part of the device.

A: Switch to control the heating resistor incorpora-

ted in the device.

B: Indicator light to check the operating status of

your device.

C: Supply tap to allow inlet of hot water from the

central heating.This can be thermostatically

controlled or not depending on your choice.

D: Boiler return tap to allow the hot water to leave

the central heating.

E: Lower cover.

Service pressure must not exceed 4 bar.

2) Use on electricity SUMMER SETTING: the central heating circuit is not working.

A switch is on I.The B indicator light is ON, the heating resistor incorporated in the device is supplied.The

supply tap C must be closed. The boiler return tap D must remain open.

3) Use on central heating WINTER SETTING: the central heating circuit is working.

A switch is on O. The B indicator light is OFF, the heating resistor incorporated in the device is not sup-

plied.The supply tap C must be open. The boiler return tap D must remain open.

(to be measured between the pilot wire and the neutral).

CONFORT

setting

SING THE DEVICE

CASE OF THE MIXED VERSIONS WITH FAN

Negative half-

Full alternance

alternance

230V

-115V

ECO

STANDBY

3°C to 4°C

Standby

below

temperature,

CONFORT

about 7°C

setting

Positive half-

alternance

+115V

STOP LOAD

SHEDDING

Instant device

stop. Can also

be used for load

shedding.