AirTech ATS-100 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AirTech ATS-100. AirTech ATS-100 8 pagina's. Land mobile radio

Unpacking

Unpack and check that all items have been enclosed.

Packing contents:

radio

antenna

(1,700 mAH)

belt clip

hand strap

manual

Optional

AccessoriesExternal speaker/microphone

1. Additional battery pack

Installation and Removal, Belt Clip

Installation: Align the belt clip with

battery pack

charger

user's

the plastic slots of the battery pack. Slide the belt clip

onto the battery pack, pushing firmly until a click heard.

Removal: Hold up the belt clip release tab with a

fingernail or a coin (or like instrument). While holding up

the release tab, slide the belt clip out and away from the

battery pack.

Installation and Removal, Battery Pack

Installation: Turn off the transceiver. Hold the

transceiver with the back of the unit facing up. Place the

battery pack against the back of the

transceiver so that the tabs on the

transceiver engage the four openings in

the battery pack. Slide the battery pack

toward the top of the transceiver until a

click heard.

Removal: Turn off the transceiver. Hold

the radio with the back of the unit facing up. With the

thumbnail of your other hand slide the latch lever down.

While holding the latch lever down, slide the battery pack

down toward the bottom of the transceiver. Separate the

battery pack from the transceiver.

Installation Antenna

Rotate the antenna clockwise until it is seated firmly.

*. Before starting operation, make sure the battery is fully

charged.