Atlantic PGPSM-74045 Producthandleiding - Pagina 2

Blader online of download pdf Producthandleiding voor {categorie_naam} Atlantic PGPSM-74045. Atlantic PGPSM-74045 12 pagina's.

Introduction

Thank you for selecting the Atlantic Pond & Garden Protector. Before using this kit please

take a moment to review this manual.

The Pond & Garden Protector can be assembled in an open area away from the water

garden. Once assembled, one person can easily lift the Pond & Garden Protector to place it

in its final location.

Recommended Use: Designed for leaves and light debris. Not designed to carry heavy

snow loads.

Assembly Instructions

Step 1:

Spread the Nylon Base out on the ground in

the shape of a rectangle. Make sure that the

base lays flat and that the sides are not twisted.

(Figure 1)

Step 2:

Assemble the fiberglass poles by inserting the

male end of one pole into the metal connector

of the next. The individual sections of each

fiberglass pole are strung together with an

elastic cord. This cord holds the sections

together once assembled. (Figure 2)

Step 3:

Place the Center Pole Receptor in the center of

the Nylon Base. Insert the male ends of the four

poles into each of the four holes in the Pole

Receptor. (Figure 3a) The poles should be

pointed toward the four corners of the nylon

base. If they do not point toward the corners,

rotate the Pole Receptor 90°. (Figure 3b)

Step 4:

Starting at one corner, insert the end of the pole

(with the rubber cap) into the pocket that is

sewn into the Nylon Base. Repeat this step for

the other three poles. When making the

connection at the last corner, lift the pole up as

you insert it into the pocket. This will force the

center of the structure up to create the dome

shape. (Figure 4)

Figure 1

Figure 2

Figure 3a

Figure 3b

Figure 4