Electrolux ICON E30DD75ESS Handleiding voor installatie-instructies - Pagina 22

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Electrolux ICON E30DD75ESS. Electrolux ICON E30DD75ESS 33 pagina's. External blower assembly for electrolux retractable ventilation systems
Ook voor Electrolux ICON E30DD75ESS: Handleiding voor installatie-instructies (14 pagina's), Brochure & specificaties (4 pagina's), Specificatieblad (1 pagina's), Gebruiks- en onderhoudshandleiding (12 pagina's), Fabriekscatalogus onderdelen (6 pagina's), Gebruiks- en onderhoudshandleiding (12 pagina's), Specificaties en afmetingen (2 pagina's), Handleiding voor installatie-instructies (14 pagina's)

SAFETY PRECAUTIONS

WARNING

• To reduce the risk of fire, electric shock, or injury to persons, observe the following:

a) Installation work and electrical wiring must be done by qualified person(s) in

accordance with all applicable codes and standards, including fire-rated

construction.

b) Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent back

drafting. Follow the heating equipment manufacturer's guidelines and safety

standards such as those published by the National Fire Protection

Association (NFPA), and the American Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the local code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

d) Ducted fans must always be vented outdoors.

e) Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer.

f) Before servicing or cleaning unit, switch power off at service panel and lock

the service disconnecting means to prevent power from being switched on

accidentally. When the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag, to the service

panel.

g) Blower must not be installed in a ceiling thermally insulated to a value

greater than R40.

h) Blower must not be installed in furnace ductwork.

• To reduce the risk of fire, use only metal ductwork.

Safety