Atlantic Technology SP-8000 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Atlantic Technology SP-8000. Atlantic Technology SP-8000 16 pagina's. Atlantic technology instruction manual subwoofer preamplifier sp-8000 high performance customized bass management for any freestanding amplified subwoofer

Pagina afdrukken
6
Back Panel
Preamplifier Back Panel
Figure 4
1
MODEL - SERIAL NUMBER
DESIGNED AND ENGINEERED IN USA,
MANUFACTURED IN TAIWAN
Product Serial Number
1
Write this number in the space provided on page 2 for future ref-
erence.
2
Direct Access Remote Control port
Use for hard-wired direct access of remote control functions. A
contact closure between "com" and any function will activate that
function
Remote Control jacks
3
The IR IN jack accepts an IR signal from a separately powered sys-
tem or an IR signal generated by a "whole-house" controller. Use
the THRU jack to"daisy-chain"to other devices.(page 9)
EXT IR Receiver Connector
4
Use the EXT IR RCVR input powered port to connect to a 3-wire
12 volt IR receiver module (xantech,ect.) when the preamplifier
is not in line-of-sight with the remote control. Use the OUT TO
SLAVE jack to pass on the received signal to other equipment.
5
INPUT
OUTPUT
2
EXT IR RCVR
SLAVE
COMMAND
OUT TO
IR IN
THRU
SLAVE
4
3
Low Level jacks
5
Use the input jack to connect to the "subwoofer" or "LFE line out"
from your processor/receiver. Use the output jack to connect to
your subwoofer's input. Use the XLR-type balanced connectors,
if possible,to obtain lowest noise and hum.
AC Input
7
Use the includedAC adapter to connect your preamplifier to a wall
outlet.(page 9)
SP-8000 Subwoofer Preamplifier
AC INPUT
Manufactured under license from THX Ltd. THX, THX Ultra2 and
16 V
THX Select are registered trademarks of THX Ltd.
50 / 60 Hz
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE / NE PAS OUVRIR
7