Atlantic Ultraviolet Sanidyne Prime 40-0633A Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atlantic Ultraviolet Sanidyne Prime 40-0633A. Atlantic Ultraviolet Sanidyne Prime 40-0633A 16 pagina's. Ultraviolet portable area sanitizers
Pagina afdrukken
PRODUCT APPLICATIONS
C
onstruCtion
The Sanidyne
Prime Portable Area Sanitizer consists of:
®
Germicidal Ultraviolet Lamps: Deliver ultraviolet energy at the specific wavelength of 254 nanometers (nm).
• STER-L-RAY
®
This wavelength is highly effective against microbes including: virus, bacteria, and mold spores.
• Timer: A microprocessor controller provides easily programmable treatment times in minutes and hours (up to 24 hours), to suit
a variety of room sizes.
• Audible Exit Warning: Provides an audible warning for 1 minute and 30 seconds after the start button is pushed, allowing the
operator time to leave the area before the disinfection cycle begins.
• Elapsed Time Indicator: A non-resettable display of the operating hours. Useful for scheduling and recording maintenance and
lamp replacement.
• Power Cord: For 120v AC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for a
properly grounded outlet. 230v AC 50/60Hz models use a CEE 7/7 (Schuko type) plug. Consult factory for alternate plug types.
• Storage Cover: Protects the germicidal lamps from breakage while transporting and/or storing the sanitizer and provides a way
to safely test the ultraviolet lamp operation.
• Sight Ports: Located on the top cover, allow observation of the germicidal lamps without the risk of ultraviolet exposure when
the storage cover is on.
• Stainless Steel Lamp Guard Assembly: Protects lamps from damage during normal operation.
• Stainless Steel Construction: All electronics and wiring are housed in an enclosure constructed of stainless steel. Stainless steel
construction provides strength, durability and will withstand most harsh environments.
• Sanidyne
Prime will operate between 120v 50/60Hz and 250v 50/60Hz.
®
P
o
rinCiPle of
Peration
The Sanidyne
Prime design has been carefully conceived to provide direct germicidal ultraviolet exposure for air and surface
®
disinfection in unoccupied space to disinfect and prevent areas and surfaces from microorganisms. The ultraviolet disinfection
dosage is a function of time and the intensity, of the ultraviolet radiation to which the air and surrounding surfaces are exposed.
Note that the Sanidyne
replacement. Follow your facilities cleaning and disinfection protocols before using the Sanidyne
No special room preparation is required prior to treating a room or area with the Sanidyne
must be directly exposed to the UV rays. These rays will not penetrate materials like cloth, paper or ordinary glass, therefore,
it is important to remove items from the direct line of sight that would block or shield the rays from other surfaces. The Sanidyne
Prime does not generate any harmful byproducts, nor does it leave any residual substances.
It is the user's responsibility to determine and validate the suitability of the equipment for use in system or
process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use.
Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in
temperature. Temperature range: 40°F to 95°F. The user should periodically inspect, clean as necessary and confirm the
presence and good legibility of the Product safety labels. Contact the factory for replacement labels in the event that any of
the labeling is missing or illegible.
The UV Treatment Results achieved are subject to variations in application conditions, it is recommended
that culture tests be performed to confirm desired outcomes.
l
imitations
•
Safety procedures MUST be implemented to prevent ultraviolet exposure of occupants to direct or reflected ultraviolet rays.
Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.
•
6
Prime should be used as a supplement to your facility's cleaning and disinfection protocols, not as a
®
Personal protection equipment is required when entering the irradiated space with the germicidal
lamp(s) operating. Personal protection equipment includes skin and eye protection such as gloves,
long sleeves with no gaps between cuff and gloves, and an ultraviolet blocking face shield (included
with the purchase of the Sanidyne
®
Prime).
®
Prime.
®
Prime; however, target surfaces
®